The relationship between mechanical adjustment and computer program parameter setting when wire diameter of springs produced by camless spring forming machine has been changed.
The relationship between mechanical adjustment and computer program parameter setting when wire diameter of springs produced by camless spring forming machine has been changed.
1) If the wire diameter and outer diameter of the spring remain the same, but the length is increased or decreased, no mechanical adjustment is required, only the parameters need to be modified in the system
2) If the wire diameter of the spring remains the same but the outer diameter increases or decreases, requiring minor mechanical adjustments, and the parameters need to be modified in the computer program .
3) If the wire diameter changes and the outer diameter and length of the spring remain the same, steel wires with different diameters need to be replaced when changing the type, and the mold tooling that needs to be replaced will also be more than the same wire diameter, and the main needs to be replaced is wire feeding wheels, mandrels, curve gauges, molds, and the parameters of program wire length will be slightly adjusted.
4) When the diameter of the steel wire changes and the size of the outer diameter of the product changes, it is necessary to replace the tooth mold and also need to replace the wire feeding wheel, mandrel, curve gauge and other tooling, and the program parameter settings will also be adjusted to a large extent.
To sum up, for the camless spring forming machine, there are more items that need to be adjusted when changing the wire diameter of the product than changing the outer diameter of the spring, and there are more changes in the program parameter settings.
1) If the wire diameter and outer diameter of the spring remain the same, but the length is increased or decreased, no mechanical adjustment is required, only the parameters need to be modified in the system
2) If the wire diameter of the spring remains the same but the outer diameter increases or decreases, requiring minor mechanical adjustments, and the parameters need to be modified in the computer program .
3) If the wire diameter changes and the outer diameter and length of the spring remain the same, steel wires with different diameters need to be replaced when changing the type, and the mold tooling that needs to be replaced will also be more than the same wire diameter, and the main needs to be replaced is wire feeding wheels, mandrels, curve gauges, molds, and the parameters of program wire length will be slightly adjusted.
4) When the diameter of the steel wire changes and the size of the outer diameter of the product changes, it is necessary to replace the tooth mold and also need to replace the wire feeding wheel, mandrel, curve gauge and other tooling, and the program parameter settings will also be adjusted to a large extent.
To sum up, for the camless spring forming machine, there are more items that need to be adjusted when changing the wire diameter of the product than changing the outer diameter of the spring, and there are more changes in the program parameter settings.