How to make wire forms of basket handle by spring forming machine

Design the Wire Form: Create a detailed design or blueprint of the wire form you want to create. Specify the dimensions, bends, twists, and loops required for the basket handle.

Choose the Right Wire: Select the appropriate type and diameter of wire based on the design requirements and the strength needed for the basket handle.

Set Up the Spring Forming Machine: Adjust the settings on the spring forming machine according to the wire dimensions, bend angles, and other specifications from your design.

Feed the Wire: Place the wire spool in the machine and feed the wire through the machine's bending mechanisms.

Program the Machine: Input the design specifications into the machine's control panel to ensure accurate bending and forming of the wire.

Start the Machine: Activate the spring forming machine to begin the shaping process. The machine will bend, twist, and shape the wire according to the programmed design.

Inspect the Formed Wire: Once the machine has finished the forming process, inspect the wire form to ensure it matches the design requirements.

Adjustments: Make any necessary adjustments to the machine settings or the wire form if needed.

Cut and Finish: Cut any excess wire and finish the ends of the wire form as required for attaching to the basket.

Quality Check: Finally, perform a quality check to ensure the wire form meets the desired specifications for strength, shape, and appearance.