Daily maintenance method of camless spring forming machine
Daily maintenance method of camless spring forming machine
1. Correct installation and placement:
After the camless spring machine is placed in the workshop, the ground must be completely ground. During the transportation of the manufacturer, there is a wooden board with a bottom. It is necessary to remove the wooden board and put a rubber pad on it. The purpose of this is to prevent the machine from being damaged during the production process. It will vibrate due to the operation of the machine.
2. Regularly add oil and grease:
The oiling position of the camless spring machine is mainly the coiler, the feeding box, the transmission gear, etc., and the lubrication of the mechanical parts is kept for a long time at the running-in place, and the butter is generally checked once a week;
3. Keep the camless spring machine clean:
Before leaving get off work every day, employees need to wipe the surface of the machine clean. If it is not cleaned for a long time and oil accumulates, there may be changes in circuit parameters, and long-term erosion of dust will age the surface of the machine and affect the appearance;
4. Normal operation and use:
Pay special attention not to produce products that exceed the range of wire diameters as much as possible, so as not to reduce the accuracy of the equipment. The Shenzhen camless spring machine needs to be placed in a ventilated and dry place to prevent moisture from rusting or damaging the circuit.
1. Correct installation and placement:
After the camless spring machine is placed in the workshop, the ground must be completely ground. During the transportation of the manufacturer, there is a wooden board with a bottom. It is necessary to remove the wooden board and put a rubber pad on it. The purpose of this is to prevent the machine from being damaged during the production process. It will vibrate due to the operation of the machine.
2. Regularly add oil and grease:
The oiling position of the camless spring machine is mainly the coiler, the feeding box, the transmission gear, etc., and the lubrication of the mechanical parts is kept for a long time at the running-in place, and the butter is generally checked once a week;
3. Keep the camless spring machine clean:
Before leaving get off work every day, employees need to wipe the surface of the machine clean. If it is not cleaned for a long time and oil accumulates, there may be changes in circuit parameters, and long-term erosion of dust will age the surface of the machine and affect the appearance;
4. Normal operation and use:
Pay special attention not to produce products that exceed the range of wire diameters as much as possible, so as not to reduce the accuracy of the equipment. The Shenzhen camless spring machine needs to be placed in a ventilated and dry place to prevent moisture from rusting or damaging the circuit.